Specification sheet Wheel Loader Ref kawasaki-80zv-wheel-loader
Kawasaki 80ZV
The Kawasaki 80ZV is a wheel loader with an operating weight of 38,867.5 lb (17,630 kg), a 208 hp engine, and a 4.19 yd³ (3.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,867.5lb
17,630kg
Engine power
208hp
155.11kW
Gross Power Bucket capacity
4.19yd³
3.2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 80ZV sits above the median for its class:
- Operating weight 38,870 lb heavier than 79% (n=439)
- Engine power 208 hp more powerful than 83% (n=408)
- Bucket capacity 4.2 yd³ larger-bucket than 82% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CTAA8.3 | |
| Gross Power | 208hp | 155.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 704lb ft | 954.5Nm |
| Displacement | 504cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged & intercooler |
02 Operational Specification
| Operating Weight | 38867.5lb | 17630kg |
|---|---|---|
| Fuel Capacity | 63.5gal | 240L |
| Hydraulic System Fluid Capacity | 42.3gal | 160L |
| Engine Oil Fluid Capacity | 5gal | 18.9L |
| Cooling System Fluid Capacity | 15.6gal | 58.9L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Rear Axle/Diff Fluid Capacity | 14.6gal | 55L |
| Static Tipping Weight | 30247.5lb | 13720kg |
| Turning Radius | 21ft in | 6375mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5x25-16PR (L-3) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.9mph | 36.9km/h |
| Max Speed - Reverse | 23.2mph | 37.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 17gal/min | 64.4L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.4sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.72ft in | 2960mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.19yd3 | 3.2m3 |
| Bucket Capacity - Struck | 3.54yd3 | 2.7m3 |
| Bucket Width | 9.19ft in | 2800mm |
| Breakout Force | 36140lb | 160.76kN |
06 Dimensions Dimensions
| Ground Clearance | 1.53ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 26.6ft in | 8105mm |
| Width Over Tires | 8.8ft in | 2680mm |
| Height To Top Of Cab | 11.32ft in | 3448mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.44ft in | 4095mm |
| Reach At Max Lift And Dump | 3.71ft in | 1130mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.