Specification sheet Wheel Loader Ref kawasaki-80zii-wheel-loader
Kawasaki 80ZII
The Kawasaki 80ZII is a wheel loader with an operating weight of 33,270 lb (15,091.02 kg), a 165 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
33,270lb
15,091.02kg
Engine power
165hp
123.05kW
Gross Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 80ZII sits in the middle of its class:
- Operating weight 33,270 lb heavier than 60% (n=439)
- Engine power 165 hp more powerful than 50% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CT-8.3-C | |
| Gross Power | 165hp | 123.1kw |
| Power Measured @ | 2200rpm | |
| Displacement | 504.5cu in | 8.3L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 33270lb | 15091.1kg |
|---|---|---|
| Fuel Capacity | 56.8gal | 215L |
| Hydraulic System Fluid Capacity | 47.6gal | 180L |
| Engine Oil Fluid Capacity | 6.1gal | 23L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 10.4gal | 39L |
| Front Axle/Diff Fluid Capacity | 8.8gal | 33L |
| Rear Axle/Diff Fluid Capacity | 8.8gal | 33L |
| Static Tipping Weight | 24090lb | 10927.1kg |
| Turning Radius | 21.2ft in | 6460mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 20.5-25-16PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed - Reverse | 22.7mph | 36.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2775psi | 19133kPa |
|---|---|---|
| Pump Flow Capacity | 46gal/min | 174.2L/min |
| Raise Time | 6.6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.2sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.99ft in | 2740mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
| Bucket Capacity - Struck | 3.27yd3 | 2.5m3 |
| Bucket Width | 8.86ft in | 2700mm |
| Breakout Force | 34840lb | 154.98kN |
06 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 24.37ft in | 7425mm |
| Width Over Tires | 8.32ft in | 2535mm |
| Height To Top Of Cab | 10.88ft in | 3315mm |
| Wheelbase | 9.78ft in | 2980mm |
| Hinge Pin - Max Height | 12.75ft in | 3885mm |
| Reach At Max Lift And Dump | 3.7ft in | 1125mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.