Specification sheet Wheel Loader Ref kawasaki-70zv-wheel-loader
Kawasaki 70ZV
The Kawasaki 70ZV is a wheel loader with an operating weight of 31,592.25 lb (14,330 kg), a 168 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
31,592.25lb
14,330kg
Engine power
168hp
125.3kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 70ZV sits in the middle of its class:
- Operating weight 31,590 lb heavier than 55% (n=439)
- Engine power 168 hp more powerful than 54% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSB5.9 | |
| Net Power | 168hp | 125.3kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 525lb ft | 711.9Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged & intercooler |
02 Operational Specification
| Operating Weight | 31592.3lb | 14330kg |
|---|---|---|
| Fuel Capacity | 75.3gal | 285L |
| Hydraulic System Fluid Capacity | 45gal | 170L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 11.9gal | 45L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 13.3gal | 50L |
| Rear Axle/Diff Fluid Capacity | 13.8gal | 52L |
| Static Tipping Weight | 26631.9lb | 12080kg |
| Turning Radius | 19.9ft in | 6055mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5x25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.6mph | 38km/h |
| Max Speed - Reverse | 23.5mph | 37.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 17.7gal/min | 67.1L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.1sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.24ft in | 2815mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Capacity - Struck | 3.01yd3 | 2.3m3 |
| Bucket Width | 8.76ft in | 2670mm |
| Breakout Force | 27780lb | 123.58kN |
06 Dimensions Dimensions
| Ground Clearance | 1.33ft in | 405mm |
|---|---|---|
| Length With Bucket On Ground | 24.94ft in | 7600mm |
| Width Over Tires | 8.49ft in | 2585mm |
| Height To Top Of Cab | 10.95ft in | 3335mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.77ft in | 3890mm |
| Reach At Max Lift And Dump | 3.58ft in | 1090mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.