Specification sheet Wheel Loader Ref kawasaki-70ziii-wheel-loader
Kawasaki 70ZIII
The Kawasaki 70ZIII is a wheel loader with an operating weight of 28,086.9 lb (12,740 kg), a 158 hp engine, and a 3.27 yd³ (2.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,086.9lb
12,740kg
Engine power
158hp
117.9kW
Net Power Bucket capacity
3.27yd³
2.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 70ZIII sits below the median for its class:
- Operating weight 28,090 lb lighter than 65% (n=439)
- Engine power 158 hp less powerful than 57% (n=408)
- Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BTA 5.9-C | |
| Net Power | 158hp | 117.9kw |
| Power Measured @ | 2400rpm | |
| Displacement | 359cu in | 5.9L |
| Aspiration | turbocharged & after cooled |
02 Operational Specification
| Operating Weight | 28086.9lb | 12740kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 7.7gal | 29L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Rear Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Static Tipping Weight | 22035.3lb | 9995kg |
| Turning Radius | 19.9ft in | 6040mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.4mph | 36.1km/h |
| Max Speed - Reverse | 22.4mph | 36.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 11gal/min | 41.7L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.1sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.88ft in | 2705mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.27yd3 | 2.5m3 |
| Bucket Capacity - Struck | 2.75yd3 | 2.1m3 |
| Bucket Width | 8.76ft in | 2670mm |
| Breakout Force | 28670lb | 127.54kN |
06 Dimensions Dimensions
| Ground Clearance | 1.33ft in | 405mm |
|---|---|---|
| Length With Bucket On Ground | 24.22ft in | 7380mm |
| Width Over Tires | 8.49ft in | 2585mm |
| Height To Top Of Cab | 10.91ft in | 3325mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.41ft in | 3780mm |
| Reach At Max Lift And Dump | 3.66ft in | 1115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.