Specification sheet Wheel Loader Ref kawasaki-70zii-wheel-loader
Kawasaki 70ZII
The Kawasaki 70ZII is a wheel loader with an operating weight of 29,700 lb (13,471.7 kg), a 158 hp engine, and a 3.27 yd³ (2.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,700lb
13,471.7kg
Engine power
158hp
117.9kW
Net Power Bucket capacity
3.27yd³
2.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 70ZII sits in the middle of its class:
- Operating weight 29,700 lb lighter than 56% (n=439)
- Engine power 158 hp less powerful than 57% (n=408)
- Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BTA 5.9-C | |
| Net Power | 158hp | 117.9kw |
| Power Measured @ | 2400rpm | |
| Displacement | 359cu in | 5.9L |
| Aspiration | turbocharged, after cooled |
02 Operational Specification
| Operating Weight | 29700lb | 13471.7kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 7.7gal | 29L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Rear Axle/Diff Fluid Capacity | 13.5gal | 51L |
| Static Tipping Weight | 23270lb | 10555.1kg |
| Turning Radius | 19.9ft in | 6040mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.4mph | 36.1km/h |
| Max Speed - Reverse | 22.4mph | 36.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 11gal/min | 41.7L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.1sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.08ft in | 2765mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.27yd3 | 2.5m3 |
| Bucket Capacity - Struck | 2.75yd3 | 2.1m3 |
| Bucket Width | 8.76ft in | 2670mm |
| Breakout Force | 28670lb | 127.54kN |
06 Dimensions Dimensions
| Ground Clearance | 1.53ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 24.02ft in | 7320mm |
| Width Over Tires | 8.65ft in | 2635mm |
| Height To Top Of Cab | 11.11ft in | 3385mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.59ft in | 3837.44mm |
| Reach At Max Lift And Dump | 3.47ft in | 1055mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.