Specification sheet Wheel Loader Ref kawasaki-65zv-wheel-loader
Kawasaki 65ZV
The Kawasaki 65ZV is a wheel loader with an operating weight of 23,611.51 lb (10,710 kg), a 134 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,611.51lb
10,710kg
Engine power
134hp
100kW
Net Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 65ZV sits at the compact end of its class:
- Operating weight 23,610 lb lighter than 91% (n=439)
- Engine power 134 hp less powerful than 81% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BTAA5.9 | |
| Net Power | 134hp | 100kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 401lb ft | 543.7Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged & intercooler |
02 Operational Specification
| Operating Weight | 23611.6lb | 10710kg |
|---|---|---|
| Fuel Capacity | 55.5gal | 210L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 11.4gal | 43L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 19136.2lb | 8680kg |
| Turning Radius | 18.8ft in | 5715mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5x25-12PR (L2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.8mph | 36.7km/h |
| Max Speed - Reverse | 22.8mph | 36.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 16.1gal/min | 61L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.01ft in | 2745mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
| Bucket Capacity - Struck | 2.36yd3 | 1.8m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 22530lb | 100.22kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 23.69ft in | 7220mm |
| Width Over Tires | 7.8ft in | 2375mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.14ft in | 3700mm |
| Reach At Max Lift And Dump | 3.53ft in | 1075mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.