Specification sheet Wheel Loader Ref kawasaki-65zv-2-wheel-loader
Kawasaki 65ZV-2
The Kawasaki 65ZV-2 is a wheel loader with an operating weight of 25,573.63 lb (11,600 kg), a 149 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,573.63lb
11,600kg
Engine power
149hp
111.2kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 65ZV-2 sits below the median for its class:
- Operating weight 25,570 lb lighter than 80% (n=439)
- Engine power 149 hp less powerful than 66% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | 4HKIX | |
| Net Power | 149hp | 111.2kw |
| Gross Power | 154hp | 114.9kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 431lb ft | 584.4Nm |
| Displacement | 317cu in | 5.2L |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharger with Intercooler |
02 Operational Specification
| Operating Weight | 25573.7lb | 11600kg |
|---|---|---|
| Fuel Capacity | 55.5gal | 210L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Engine Oil Fluid Capacity | 4gal | 15L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 22950.2lb | 10410kg |
| Turning Radius | 19ft in | 5770mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25-12PR |
03 Transmission Specification
| Transmission Type | Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.3mph | 35.8km/h |
| Max Speed - Reverse | 22.3mph | 35.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.24ft in | 2815mm |
|---|---|---|
| Bucket Capacity - Struck | 2.62yd3 | 2m3 |
| Bucket Width | 8.4ft in | 2560mm |
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.46ft in | 445mm |
|---|---|---|
| Length With Bucket On Ground | 23.59ft in | 7190mm |
| Width Over Tires | 7.9ft in | 2405mm |
| Height To Top Of Cab | 10.73ft in | 3270mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.37ft in | 3770mm |
| Reach At Max Lift And Dump | 3.3ft in | 1005mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.