Specification sheet Wheel Loader Ref kawasaki-65ziv-2-wheel-loader
Kawasaki 65ZIV-2
The Kawasaki 65ZIV-2 is a wheel loader with an operating weight of 22,972.17 lb (10,420 kg), a 134 hp engine, and a 2.62 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,972.17lb
10,420kg
Engine power
134hp
100kW
Net Power Bucket capacity
2.62yd³
2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 65ZIV-2 sits at the compact end of its class:
- Operating weight 22,970 lb lighter than 95% (n=439)
- Engine power 134 hp less powerful than 81% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | B5.9-C | |
| Net Power | 134hp | 100kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 383lb ft | 519.3Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 22972.2lb | 10420kg |
|---|---|---|
| Fuel Capacity | 47.6gal | 180L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 3.8gal | 14.2L |
| Cooling System Fluid Capacity | 11.2gal | 42.2L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 17747.3lb | 8050kg |
| Turning Radius | 18.8ft in | 5710mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5x25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.1mph | 37.2km/h |
| Max Speed - Reverse | 23.1mph | 37.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2770psi | 19098.5kPa |
|---|---|---|
| Pump Flow Capacity | 16.1gal/min | 61L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.85ft in | 2695mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.62yd3 | 2m3 |
| Bucket Capacity - Struck | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 21400lb | 95.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 23ft in | 7010mm |
| Width Over Tires | 7.8ft in | 2375mm |
| Height To Top Of Cab | 10.5ft in | 3200mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 11.85ft in | 3610mm |
| Reach At Max Lift And Dump | 3.66ft in | 1115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.