Specification sheet Wheel Loader Ref kawasaki-65ziii-wheel-loader
Kawasaki 65ZIII
The Kawasaki 65ZIII is a wheel loader with an operating weight of 22,046.23 lb (10,000 kg), a 120 hp engine, and a 2.62 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,046.23lb
10,000kg
Engine power
120hp
89.5kW
Net Power Bucket capacity
2.62yd³
2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Kawasaki 65ZIII sits at the compact end of its class:
- Operating weight 22,050 lb lighter than 100% (n=439)
- Engine power 120 hp less powerful than 90% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | 6 BG 1 | |
| Net Power | 120hp | 89.5kw |
| Power Measured @ | 2350rpm | |
| Max Torque | 290lb ft | 393.2Nm |
| Displacement | 396cu in | 6.5L |
| Torque Measured @ | 1500rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 22046.3lb | 10000kg |
|---|---|---|
| Fuel Capacity | 47.6gal | 180L |
| Hydraulic System Fluid Capacity | 25.1gal | 95L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 6.9gal | 26L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 16744.2lb | 7595kg |
| Turning Radius | 18.8ft in | 5710mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5-25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.1mph | 37.2km/h |
| Max Speed - Reverse | 23.1mph | 37.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2770psi | 19098.5kPa |
|---|---|---|
| Pump Flow Capacity | 14.5gal/min | 54.9L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.83ft in | 2690mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.62yd3 | 2m3 |
| Bucket Capacity - Struck | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 21400lb | 95.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 22.48ft in | 6850mm |
| Width Over Tires | 7.8ft in | 2375mm |
| Height To Top Of Cab | 10.47ft in | 3190mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 11.85ft in | 3610mm |
| Reach At Max Lift And Dump | 3.66ft in | 1115mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.