Specification sheet Wheel Loader Ref kawasaki-65zii-wheel-loader
Kawasaki 65ZII
The Kawasaki 65ZII is a wheel loader with an operating weight of 21,450 lb (9,729.56 kg), a 108 hp engine, and a 2.29 yd³ (1.75 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,450lb
9,729.56kg
Engine power
108hp
80.6kW
Net Power Bucket capacity
2.29yd³
1.75m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 65ZII sits at the heavy end of its class:
- Operating weight 21,450 lb heavier than 97% (n=374)
- Engine power 108 hp more powerful than 87% (n=367)
- Bucket capacity 2.3 yd³ larger-bucket than 92% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | 6BG1 | |
| Net Power | 108hp | 80.6kw |
| Power Measured @ | 2350rpm | |
| Max Torque | 290lb ft | 393.2Nm |
| Displacement | 396cu in | 6.5L |
| Torque Measured @ | 1500rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 21450lb | 9729.6kg |
|---|---|---|
| Fuel Capacity | 47.6gal | 180L |
| Hydraulic System Fluid Capacity | 25.1gal | 95L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 10.9gal | 41L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 15830lb | 7180.4kg |
| Turning Radius | 18.7ft in | 5680mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 17.5-25-12PR (L2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.2mph | 39km/h |
| Max Speed - Reverse | 24.2mph | 39km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2770psi | 19098.5kPa |
|---|---|---|
| Pump Flow Capacity | 10.6gal/min | 40.2L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.95ft in | 2725mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.29yd3 | 1.75m3 |
| Bucket Capacity - Struck | 1.97yd3 | 1.5m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 21950lb | 97.64kN |
06 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 22.28ft in | 6790mm |
| Width Over Tires | 7.8ft in | 2375mm |
| Height To Top Of Cab | 10.47ft in | 3190mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 11.85ft in | 3610mm |
| Reach At Max Lift And Dump | 3.65ft in | 1110mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.