Specification sheet Wheel Loader Ref kawasaki-60zv-wheel-loader
Kawasaki 60ZV
The Kawasaki 60ZV is a wheel loader with an operating weight of 20,026.8 lb (9,084 kg), a 119 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,026.8lb
9,084kg
Engine power
119hp
88.8kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 60ZV sits at the heavy end of its class:
- Operating weight 20,030 lb heavier than 90% (n=374)
- Engine power 119 hp more powerful than 93% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | BB 6BG1T | |
| Net Power | 119hp | 88.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 347lb ft | 470.5Nm |
| Displacement | 396cu in | 6.5L |
| Torque Measured @ | 1600rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 20026.8lb | 9084kg |
|---|---|---|
| Fuel Capacity | 46.3gal | 175L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 14.6gal | 55L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 17416.6lb | 7900kg |
| Turning Radius | 17.8ft in | 5415mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5x25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.1mph | 34km/h |
| Max Speed - Reverse | 21.1mph | 34km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 31gal/min | 117.4L/min |
| Raise Time | 6sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.99ft in | 2740mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Capacity - Struck | 1.97yd3 | 1.5m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 18500lb | 18500- |
06 Dimensions Dimensions
| Ground Clearance | 1.33ft in | 405mm |
|---|---|---|
| Length With Bucket On Ground | 21.89ft in | 6670mm |
| Width Over Tires | 7.58ft in | 2310mm |
| Height To Top Of Cab | 10.22ft in | 3115mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.72ft in | 3570mm |
| Reach At Max Lift And Dump | 3.32ft in | 1010mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.