Specification sheet Wheel Loader Ref kawasaki-60ziv-2-wheel-loader
Kawasaki 60ZIV-2
The Kawasaki 60ZIV-2 is a wheel loader with an operating weight of 19,043.53 lb (8,638 kg), a 109 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,043.53lb
8,638kg
Engine power
109hp
81.3kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 60ZIV-2 sits above the median for its class:
- Operating weight 19,040 lb heavier than 85% (n=374)
- Engine power 109 hp more powerful than 88% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | B5.9-C | |
| Net Power | 109hp | 81.3kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 325lb ft | 440.7Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1600rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 19043.6lb | 8638kg |
|---|---|---|
| Fuel Capacity | 46.3gal | 175L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 8.5gal | 32L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 16016.6lb | 7265kg |
| Turning Radius | 17.6ft in | 5335mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5x25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.1mph | 32.4km/h |
| Max Speed - Reverse | 20.1mph | 32.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 31gal/min | 117.4L/min |
| Raise Time | 6sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.67ft in | 2640mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Capacity - Struck | 1.84yd3 | 1.4m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 17600lb | 78.29kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 21.46ft in | 6540mm |
| Width Over Tires | 7.42ft in | 2260mm |
| Height To Top Of Cab | 10.13ft in | 3085mm |
| Wheelbase | 8.7ft in | 2650mm |
| Hinge Pin - Max Height | 11.36ft in | 3460mm |
| Reach At Max Lift And Dump | 3.56ft in | 1085mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.