Specification sheet Wheel Loader Ref kawasaki-60zii-wheel-loader
Kawasaki 60ZII
The Kawasaki 60ZII is a wheel loader with an operating weight of 18,760 lb (8,509.4 kg), a 103 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,760lb
8,509.4kg
Engine power
103hp
76.9kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 60ZII sits above the median for its class:
- Operating weight 18,760 lb heavier than 82% (n=374)
- Engine power 103 hp more powerful than 83% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | 6BD1 | |
| Net Power | 103hp | 76.9kw |
| Power Measured @ | 2400rpm | |
| Displacement | 353cu in | 5.8L |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 18760lb | 8509.4kg |
|---|---|---|
| Fuel Capacity | 46.3gal | 175L |
| Hydraulic System Fluid Capacity | 23.8gal | 90L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 6.4gal | 24L |
| Front Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 13130lb | 5955.7kg |
| Turning Radius | 17.6ft in | 5350mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5-25-12PR (L2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.8mph | 33.5km/h |
| Max Speed - Reverse | 20.8mph | 33.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 25gal/min | 94.7L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 2.8sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.68ft in | 2645mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Capacity - Struck | 1.84yd3 | 1.4m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 17200lb | 76.51kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 380mm |
|---|---|---|
| Length With Bucket On Ground | 20.63ft in | 6285mm |
| Width Over Tires | 7.4ft in | 2255mm |
| Height To Top Of Cab | 9.96ft in | 3035mm |
| Wheelbase | 8.7ft in | 2650mm |
| Hinge Pin - Max Height | 11.41ft in | 3475mm |
| Reach At Max Lift And Dump | 3.56ft in | 1085mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.