Specification sheet Wheel Loader Ref kawasaki-50zv-wheel-loader
Kawasaki 50ZV
The Kawasaki 50ZV is a wheel loader with an operating weight of 17,504.71 lb (7,940 kg), a 96 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,504.71lb
7,940kg
Engine power
96hp
71.6kW
Net Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 50ZV sits above the median for its class:
- Operating weight 17,500 lb heavier than 76% (n=374)
- Engine power 96 hp more powerful than 76% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 74% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | B4.5T | |
| Net Power | 96hp | 71.6kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 304lb ft | 412.2Nm |
| Displacement | 274.4cu in | 4.5L |
| Torque Measured @ | 1500rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 17504.8lb | 7940kg |
|---|---|---|
| Fuel Capacity | 31.8gal | 120L |
| Hydraulic System Fluid Capacity | 22.5gal | 85L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 10.5gal | 40L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 14837.2lb | 6730kg |
| Turning Radius | 17.1ft in | 5185mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5x25-12PR (L-2) |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.1mph | 34km/h |
| Max Speed - Reverse | 21.1mph | 34km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 27gal/min | 102.3L/min |
| Raise Time | 6sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.98ft in | 2735mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.71ft in | 2350mm |
| Breakout Force | 14330lb | 63.75kN |
06 Dimensions Dimensions
| Ground Clearance | 1.33ft in | 405mm |
|---|---|---|
| Length With Bucket On Ground | 19.97ft in | 6085mm |
| Width Over Tires | 7.45ft in | 2270mm |
| Height To Top Of Cab | 10.22ft in | 3115mm |
| Wheelbase | 8.54ft in | 2600mm |
| Hinge Pin - Max Height | 11.49ft in | 3500mm |
| Reach At Max Lift And Dump | 3.15ft in | 960mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.