Specification sheet Wheel Loader Ref kawasaki-50ziv-2-wheel-loader
Kawasaki 50ZIV-2
The Kawasaki 50ZIV-2 is a wheel loader with an operating weight of 16,380.35 lb (7,430 kg), a 90 hp engine, and a 1.71 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,380.35lb
7,430kg
Engine power
90hp
67.2kW
Net Power Bucket capacity
1.71yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 50ZIV-2 sits above the median for its class:
- Operating weight 16,380 lb heavier than 69% (n=374)
- Engine power 90 hp more powerful than 71% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 69% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | B3.9C | |
| Net Power | 90hp | 67.2kw |
| Power Measured @ | 2350rpm | |
| Max Torque | 246lb ft | 333.6Nm |
| Displacement | 239.9cu in | 4L |
| Torque Measured @ | 1600rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 16380.4lb | 7430kg |
|---|---|---|
| Fuel Capacity | 31.8gal | 120L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 4.8gal | 18L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 13626.8lb | 6181kg |
| Turning Radius | 16.8ft in | 5120mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5x25-10PR (L-2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.1mph | 34km/h |
| Max Speed - Reverse | 21.1mph | 34km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 27gal/min | 102.3L/min |
| Raise Time | 5.4sec | |
| Dump Time | 1sec | |
| Lower Time | 2.8sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.39ft in | 2555mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.71yd3 | 1.3m3 |
| Bucket Capacity - Struck | 1.44yd3 | 1.11m3 |
| Bucket Width | 7.71ft in | 2350mm |
| Breakout Force | 13700lb | 60.95kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 20.12ft in | 6132mm |
| Width Over Tires | 7.21ft in | 2195mm |
| Height To Top Of Cab | 10.13ft in | 3085mm |
| Wheelbase | 8.54ft in | 2600mm |
| Hinge Pin - Max Height | 11.14ft in | 3395mm |
| Reach At Max Lift And Dump | 3.32ft in | 1010mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.