Specification sheet Wheel Loader Ref kawasaki-50ziii-wheel-loader
Kawasaki 50ZIII
The Kawasaki 50ZIII is a wheel loader with an operating weight of 15,145.76 lb (6,870 kg), a 87 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,145.76lb
6,870kg
Engine power
87hp
64.9kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Kawasaki 50ZIII sits above the median for its class:
- Operating weight 15,150 lb heavier than 66% (n=374)
- Engine power 87 hp more powerful than 69% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2353 | |
|---|---|---|
| Engine Model | 4BD1-T | |
| Net Power | 87hp | 64.9kw |
| Power Measured @ | 2250rpm | |
| Displacement | 357.4cu in | 5.9L |
| Aspiration | diesel w/ turbo |
02 Operational Specification
| Operating Weight | 15145.8lb | 6870kg |
|---|---|---|
| Fuel Capacity | 31.8gal | 120L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 5.3gal | 20L |
| Transmission Fluid Capacity | 3.5gal | 13L |
| Turning Radius | 16.8ft in | 5095mm |
| Tire Size | 15.5-25-8PR(L2) |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.2mph | 34km/h |
04 Hydraulic System Specification
| Raise Time | 5.4sec | |
|---|---|---|
| Dump Time | 1sec | |
| Lower Time | 2.8sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.86ft in | 2700mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Capacity - Struck | 1.57yd3 | 1.2m3 |
| Breakout Force | 15287.01lb | 68kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 19.49ft in | 5940mm |
|---|---|---|
| Height To Top Of Cab | 9.93ft in | 3025mm |
| Wheelbase | 8.37ft in | 2550mm |
| Reach At Max Lift And Dump | 3.17ft in | 965mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.