Specification sheet Wheel Loader Ref junlian-jl855-wheel-loader
Junlian JL855
The Junlian JL855 is a wheel loader with an operating weight of 34,000 lb, a 217.25 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
34,000lb
Engine power
217.25hp
162kW
Gross Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Junlian JL855 sits above the median for its class:
- Operating weight 34,000 lb heavier than 63% (n=439)
- Engine power 217 hp more powerful than 88% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 67G3-28 | |
|---|---|---|
| Gross Power | 217.3hp | 162kw |
| Max Torque | 579lb ft | 785Nm |
02 Operational Specification
| Operating Weight | 34000lb | -kg |
|---|---|---|
| Tire Size | 23.5-25 pr |
03 Transmission Specification
| Transmission Type | planetary, hydraulically shifting | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 22.4mph | 36km/h |
| Max Speed - Reverse | 10mph | 16km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2320.7psi | 16000kPa |
|---|---|---|
| Raise Time | 6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.83ft in | 3300mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
| Breakout Force | _- | 150kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 25.99ft in | 7920mm |
| Width Over Tires | 9.81ft in | 2990mm |
| Height To Top Of Cab | 11.49ft in | 3500mm |
| Wheelbase | 10.54ft in | 3210mm |
| Reach At Max Lift And Dump | 4.55ft in | 1385mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.