Specification sheet Wheel Loader Ref junlian-jl853-wheel-loader
Junlian JL853
The Junlian JL853 is a wheel loader with an operating weight of 32,000 lb, a 217.3 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
32,000lb
Engine power
217.3hp
162kW
Net Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Junlian JL853 sits in the middle of its class:
- Operating weight 32,000 lb heavier than 57% (n=439)
- Engine power 217 hp more powerful than 88% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 67G3-28 | |
|---|---|---|
| Net Power | 217.3hp | 162kw |
| Max Torque | 579lb ft | 785Nm |
02 Operational Specification
| Operating Weight | 32000lb | -kg |
|---|---|---|
| Tire Size | 23.5-25 pr |
03 Transmission Specification
| Transmission Type | planetary, hydraulically shifting | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 22.4mph | 36km/h |
| Max Speed - Reverse | 10mph | 16km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2320.7psi | 16000kPa |
|---|---|---|
| Raise Time | 5.8sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.55ft in | 2910mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
| Breakout Force | _- | 150kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 25ft in | 7620mm |
| Width Over Tires | 9.81ft in | 2990mm |
| Height To Top Of Cab | 11.25ft in | 3428mm |
| Wheelbase | 9.32ft in | 2840mm |
| Reach At Max Lift And Dump | 4.43ft in | 1350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.