Specification sheet Wheel Loader Ref junlian-jl835-wheel-loader
Junlian JL835
The Junlian JL835 is a wheel loader with an operating weight of 20,000 lb (9,071.85 kg), a 123.4 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,000lb
9,071.85kg
Engine power
123.4hp
92kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Junlian JL835 sits at the heavy end of its class:
- Operating weight 20,000 lb heavier than 90% (n=374)
- Engine power 123 hp more powerful than 96% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2349 | |
|---|---|---|
| Engine Model | TD226B-6 | |
| Net Power | 123.4hp | 92kw |
| Max Torque | 341.5lb ft | 463Nm |
02 Operational Specification
| Operating Weight | 20000lb | 9071.9kg |
|---|---|---|
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 22.4mph | 36km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2277.1psi | 15700kPa |
|---|---|---|
| Raise Time | 6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.67ft in | 3250mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | _- | 120.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 22.94ft in | 6990mm |
| Width Over Tires | 7.39ft in | 2250mm |
| Height To Top Of Cab | 10.57ft in | 3220mm |
| Wheelbase | 9.03ft in | 2750mm |
| Reach At Max Lift And Dump | 3.4ft in | 1036mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.