Specification sheet Wheel Loader Ref junlian-jl815-wheel-loader
Junlian JL815
The Junlian JL815 is a wheel loader with an operating weight of 12,345.89 lb (5,600 kg), a 60.4 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,345.89lb
5,600kg
Engine power
60.4hp
45kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Junlian JL815 sits in the middle of its class:
- Operating weight 12,350 lb lighter than 52% (n=374)
- Engine power 60 hp less powerful than 63% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | ZH4100K1-4 | |
|---|---|---|
| Net Power | 60.4hp | 45kw |
| Max Torque | 152lb ft | 206Nm |
02 Operational Specification
| Operating Weight | 12345.9lb | 5600kg |
|---|---|---|
| Tire Size | 16/70-20 |
03 Transmission Specification
| Transmission Type | four parallel shaft power shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 13.7mph | 22km/h |
| Max Speed - Reverse | 13.7mph | 22km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 1885.5psi | 13000kPa |
|---|---|---|
| Raise Time | 5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.55ft in | 2300mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Breakout Force | _- | 150kN |
06 Dimensions Dimensions
| Ground Clearance | 0.95ft in | 287mm |
|---|---|---|
| Length With Bucket On Ground | 18.05ft in | 5500mm |
| Width Over Tires | 6.4ft in | 1950mm |
| Height To Top Of Cab | 9.19ft in | 2800mm |
| Wheelbase | 4.89ft in | 1490mm |
| Reach At Max Lift And Dump | 3.11ft in | 946mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.