Specification sheet Skid Steer Loader Ref john-deere-jd24-skid-steer-loader

John Deere JD24

The John Deere JD24 is a skid steer loader with an operating weight of 4,750 lb (2,155 kg), a 37 hp engine, a rated operating capacity of 1,700 lb (771 kg), and a 0.6 yd³ (0.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
4,750lb
2,155kg
Engine power
37hp
27.6kW
Net Power
Rated operating capacity
1,700lb
771kg
Bucket capacity
0.6yd³
0.5m³

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the John Deere JD24 sits at the compact end of its class:

  • Operating weight 4,750 lb lighter than 88% (n=334)
  • Engine power 37 hp less powerful than 90% (n=335)
  • Rated operating capacity 1,700 lb lower-rated than 64% (n=288)

01 Engine Specification

Engine Model Wisconsin VG4D
Net Power 37hp 27.6kw
Aspiration 4-cylinder, 4-stroke cycle
Displacement 154cu in 2.6L

02 Operational Specification

Operational Weight 4750lb 2155kg
Fuel Capacity 25gal 94.6L
Engine Oil Fluid Capacity 1.3gal 4.7L
Max Speed 7mph 11km/h
Hydraulic System Fluid Capacity 20gal 75.7L
Operating Speed -7mph -11km/h
Tire Size 10.00-16.5,6-ply rating, R3
Operating Voltage 12V

03 Loader Specification

Operating Load Rating 1700lb 771kg
Bucket Capacity 0.6yd3 0.5m3

04 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 18gal/min 68L/min
Relief Valve Pressure 1750psi 12065.9kPa

05 Dimensions Dimensions

Length With Bucket 10.25ft in 3110mm
Width Over Tires 5.42ft in 1640mm
Ground Clearance — value corrected — the source published it under the wrong unit 31.3in 794mm
Wheelbase 2.91ft in 885mm
Length W/O Bucket 7.5ft in 2290mm
Clearance At Max Lift And Dump 9ft in 2740mm
Reach At Max Lift And Dump — value corrected — the source published it under the wrong unit 31.5in 800mm
Turning Radius From Center - Machine Rear — value corrected — the source published it under the wrong unit 52.4in 1330mm
Turning Radius From Center - Inc Bucket — value corrected — the source published it under the wrong unit 52.4in 1330mm

Data notes

Corrected value. The source published these figures under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.

  • Ground Clearance: shown as 31.3 in (source stated a value inconsistent with its own metric figure of 794 mm)
  • Reach At Max Lift And Dump: shown as 31.5 in (source stated a value inconsistent with its own metric figure of 800 mm)
  • Turning Radius From Center - Machine Rear: shown as 52.4 in (source stated a value inconsistent with its own metric figure of 1330 mm)
  • Turning Radius From Center - Inc Bucket: shown as 52.4 in (source stated a value inconsistent with its own metric figure of 1330 mm)

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.