Specification sheet Skid Steer Loader Ref john-deere-jd14-skid-steer-loader

John Deere JD14

The John Deere JD14 is a skid steer loader with an operating weight of 2,587 lb (1,173 kg), a 25 hp engine, a rated operating capacity of 800 lb (363 kg), and a tipping load of 1,700 lb (771.11 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
2,587lb
1,173kg
Engine power
25hp
18.65kW
Net Power
Rated operating capacity
800lb
363kg
Bucket capacity
0.3yd³
0.2m³

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the John Deere JD14 sits at the compact end of its class:

  • Operating weight 2,590 lb lighter than 97% (n=334)
  • Engine power 25 hp less powerful than 96% (n=335)
  • Rated operating capacity 800 lb lower-rated than 95% (n=288)

01 Engine Specification

Number Of Cylinders 2
Engine Make 2370
Net Power 25hp 18.7kw
Power Measured @ 3600rpm
Displacement 60cu in 1L

02 Operational Specification

Operational Weight 2587lb 1173kg
Fuel Capacity 11gal 41.6L
Engine Oil Fluid Capacity 1.1gal 3.8L
Max Speed 5mph 8.1km/h
Hydraulic System Fluid Capacity 15gal 56.8L
Operating Speed 5mph 8.1km/h
Tire Size 8.50-27-15, 4-ply-rating
Operating Voltage 12V

03 Loader Specification

Breakout Force 1500lb 680kg
Operating Load Rating 800lb 363kg
Bucket Capacity 0.3yd3 0.2m3

04 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 8gal/min 30.3L/min
Relief Valve Pressure 1500psi 10342.2kPa

05 Dimensions Dimensions

Length With Bucket 8.25ft in 2500mm
Width Over Tires 2.67ft in 813mm
Ground Clearance 7.25in 184mm
Length W/O Bucket 6ft in 1830mm
Reach At Max Lift And Dump 14.49in 368mm

Data notes

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.