Specification sheet Compact Track Loader Ref john-deere-ct332-multi-terrain-loader
John Deere CT332
The John Deere CT332 is a compact track loader with an operating weight of 10,825 lb (4,910 kg), a 76 hp engine, and a rated operating capacity of 3,201.12 lb (1,452 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,825lb
4,910kg
Engine power
76hp
56.7kW
Net Power Rated operating capacity
3,201.12lb
1,452kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere CT332 sits above the median for its class:
- Operating weight 10,830 lb heavier than 84% (n=182)
- Engine power 76 hp more powerful than 62% (n=167)
- Rated operating capacity 3,200 lb higher-rated than 72% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 5 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 5030Tw | |
| Gross Power | 82hp | 61.5kw |
| Net Power | 76hp | 56.7kw |
| Power Measured @ | 2800rpm | |
| Displacement | 186cu in | 3L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 10825lb | 4910kg |
|---|---|---|
| Fuel Capacity | 28gal | 106L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Max Speed - Low Range | 5.3mph | 8.5km/h |
| Max Speed - High Range | 7.9mph | 12.6km/h |
03 Loader Specification
| Breakout Force | 11600lb | 5261.7kg |
|---|---|---|
| Operating Load | 3201.2lb | 1452kg |
04 Hydraulic Specification
| Pump Flow | 24gal/min | 90.9L/min |
|---|---|---|
| Relief Valve Pressure | 3100psi | 21373.8kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.72ft in | 2047mm |
|---|---|---|
| Height To Top Of Cab | 6.91ft in | 2106mm |
| Ground Clearance | 11in | 279mm |
| Clearance At Max Lift And Dump | 8.51ft in | 2591mm |
| Reach At Max Lift And Dump | 2.76ft in | 841mm |
| Length With Bucket | 11.55ft in | 3518mm |
| Length With Out Bucket | 9.63ft in | 2934mm |
| Turning Radius From Center - Inc Bucket | 83.7in | 2126mm |
06 Undercarriage Dimensions
| Track Gauge | 5.24ft in | 1597mm |
|---|---|---|
| Number Of Track Rollers Per Side | 5 | |
| Width Of Track | 17.72in | 450mm |
| Ground Pressure | 4.3psi | 29.65kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.