Specification sheet Compact Track Loader Ref john-deere-ct322-multi-terrain-loader
John Deere CT322
The John Deere CT322 is a compact track loader with an operating weight of 8,305 lb (3,767 kg), a 62 hp engine, and a rated operating capacity of 2,178.17 lb (988 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,305lb
3,767kg
Engine power
62hp
46.2kW
Net Power Rated operating capacity
2,178.17lb
988kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere CT322 sits below the median for its class:
- Operating weight 8,310 lb lighter than 65% (n=182)
- Engine power 62 hp less powerful than 74% (n=167)
- Rated operating capacity 2,180 lb lower-rated than 66% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4024T | |
| Gross Power | 66hp | 49.2kw |
| Net Power | 62hp | 46.2kw |
| Power Measured @ | 2800rpm | |
| Displacement | 149cu in | 2.4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 8305lb | 3767kg |
|---|---|---|
| Fuel Capacity | 18gal | 68L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Max Speed - Low Range | 5.5mph | 8.9km/h |
| Max Speed - High Range | 8.5mph | 13.8km/h |
03 Loader Specification
| Breakout Force | 6050lb | 2744.3kg |
|---|---|---|
| Operating Load | 2178.2lb | 988kg |
04 Hydraulic Specification
| Pump Flow | 19gal/min | 72L/min |
|---|---|---|
| Relief Valve Pressure | 3450psi | 23786.9kPa |
05 Dimensions Dimensions
| Width Over Tracks | 5.96ft in | 1816mm |
|---|---|---|
| Height To Top Of Cab | 6.41ft in | 1951mm |
| Ground Clearance | 9.61in | 244mm |
| Clearance At Max Lift And Dump | 7.57ft in | 2306mm |
| Reach At Max Lift And Dump | 2.66ft in | 808mm |
| Length With Bucket | 10.49ft in | 3195mm |
| Length With Out Bucket | 8.51ft in | 2591mm |
| Turning Radius From Center - Inc Bucket | 78.91in | 2004mm |
06 Undercarriage Dimensions
| Track Gauge | 4.91ft in | 1496mm |
|---|---|---|
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 5.1psi | 35.17kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.