Specification sheet Skid Steer Loader Ref john-deere-8875-skid-steer-loader
John Deere 8875
The John Deere 8875 is a skid steer loader with an operating weight of 7,004 lb (3,177 kg), a 61 hp engine, and a rated operating capacity of 2,352 lb (1,068 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,004lb
3,177kg
Engine power
61hp
45.49kW
Net Power Rated operating capacity
2,352lb
1,068kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 8875 sits in the middle of its class:
- Operating weight 7,000 lb heavier than 57% (n=334)
- Engine power 61 hp less powerful than 52% (n=335)
- Rated operating capacity 2,350 lb higher-rated than 72% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 3029T | |
| Gross Power | 64hp | 47.8kw |
| Net Power | 61hp | 45.5kw |
| Power Measured @ | 2100rpm | |
| Aspiration | Turbocharged | |
| Displacement | 177cu in | 3L |
02 Operational Specification
| Operational Weight | 7004lb | 3177kg |
|---|---|---|
| Fuel Capacity | 18.8gal | 71.2L |
| Cooling System Fluid Capacity | 4gal | 15.1L |
| Engine Oil Fluid Capacity | 2.3gal | 8.5L |
| Max Speed | 12.1mph | 19.6km/h |
| Hydraulic System Fluid Capacity | 6.8gal | 25.5L |
| Operating Speed | 12.1mph | 19.6km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps |
03 Loader Specification
| Breakout Force | 5203lb | 2362kg |
|---|---|---|
| Operating Load Rating | 2352lb | 1068kg |
04 Hydraulic Specification
| Pump Type | 3 spool open-center | |
|---|---|---|
| Pump Flow Capacity | 17.6gal/min | 67.8L/min |
| Relief Valve Pressure | 2600psi | 17926kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.84ft in | 3607mm |
|---|---|---|
| Width Over Tires | 5.76ft in | 1753mm |
| Ground Clearance | 8in | 203mm |
| Height To Top Of Cab | 6.01ft in | 1829mm |
| Wheelbase | 4ft in | 1219mm |
| Length W/O Bucket | 9.34ft in | 2845mm |
| Clearance At Max Lift And Dump | 8.09ft in | 2464mm |
| Reach At Max Lift And Dump | 30in | 762mm |
| Turning Radius From Center - Machine Rear | 69.25in | 1759mm |
| Turning Radius From Center - Inc Bucket | 82.75in | 2102mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.