Specification sheet Wheel Loader Ref john-deere-824k-ii-wheel-loader
John Deere 824K-II
The John Deere 824K-II is a wheel loader with an operating weight of 59,083.89 lb (26,800 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
59,083.89lb
26,800kg
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the John Deere 824K-II sits above the median for its class:
- Operating weight 59,080 lb heavier than 67% (n=198)
Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Pump | Piston | |
|---|---|---|
| Engine Output-Net | 332.6hp | 248kw |
| Transmission Type | Powershift | |
| Engine Make | John Deere | |
| Engine Model | PowerTech PSS 6135 | |
| Torque | 1206lb ft | 1635Nm |
| Rated Speed | 1500rpm | |
| Displacement | 823.9cu in | 13.5L |
| Torque Rise | 57% | |
| System Voltage | 24V | |
| Emission Level | Tier 4 | |
| Alternator | 130amps |
02 Driveline Specification
| Ride Control System | Yes | |
|---|---|---|
| Service Brake Type | Wet Disc | |
| Parking Brake Type | Wet Multi Disc | |
| Differential Lock | Front- Locking, Rear- Open | |
| Service Brake Actuation | Hydraulic | |
| Tire Size - Standard | 26.5 R25 | |
| Service Brake - Location | All Wheels |
03 Capacities Specification
| Hydraulic Tank | 43.6gal | 165L |
|---|---|---|
| Heaped Capacity | 6.1yd3 | 4.6m3 |
| Transmission | 7.4gal | 27.9L |
04 Operational Specification
| Operating Weight | 59083.9lb | 26800kg |
|---|---|---|
| Fuel Capacity | 126.1gal | 477L |
| Front Axle/Diff Fluid Capacity | 14.7gal | 55.3L |
| Rear Axle/Diff Fluid Capacity | 14.7gal | 55.3L |
05 Transmission Specification
| Pump Flow | 129.8gal/min | 491L/min |
|---|---|---|
| System Pressure | 251.7psi | 1735.2kPa |
06 Bucket Dimensions
| Breakout - Bucket | 18718 (41266) kgf (lbf) | |
|---|---|---|
| Bucket Capacity - Smallest | 6.02yd3 | 4.6m3 |
| Largest Bucket Capacity | 6.81yd3 | 5.2m3 |
07 Dimensions Dimensions
| Ground Clearance | 18.19in | 462mm |
|---|---|---|
| Length With Bucket On Ground | 30.45ft in | 9280mm |
| Width Over Tires | 10.12ft in | 3084mm |
| Wheelbase | 11.36ft in | 3460mm |
| Hinge Pin - Max Height | 14.7ft in | 4480mm |
| Reach At Max Lift And Dump | 6.73ft in | 2050mm |
| Turning Circle | 47.05ft in | 14340mm |
| Height Over Cab | 11.65ft in | 3550mm |
?Questions & answersfrom this machine's data
- How much does a John Deere 824K-II wheel loader weigh?
- A John Deere 824K-II wheel loader has an operating weight of 59,083.9 lb (26,800 kg).
- How much fuel does a John Deere 824K-II wheel loader hold?
- A John Deere 824K-II wheel loader has a fuel capacity of 126.1 gal (477 L).
- What is the ground clearance of a John Deere 824K-II wheel loader?
- A John Deere 824K-II wheel loader has a ground clearance of 18.2 in (462 mm).
- How long is a John Deere 824K-II wheel loader?
- A John Deere 824K-II wheel loader has an overall length of 30.5 ft (9,280 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.