Specification sheet Wheel Loader Ref john-deere-744k-ii-wheel-loader

John Deere 744K-II

The John Deere 744K-II is a wheel loader with an operating weight of 55,807.82 lb (25,314 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
55,807.82lb
25,314kg

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the John Deere 744K-II sits in the middle of its class:

  • Operating weight 55,810 lb heavier than 57% (n=198)

Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.

01 Engine Specification

Pump Piston
Engine Output-Net 303.1hp 226kw
Transmission Type Powershift
Engine Make John Deere
Engine Model PowerTech PSS 6090
Torque 1073.2lb ft 1455Nm
Rated Speed 1500rpm
Displacement 549.3cu in 9L
Torque Rise 50%
System Voltage 24V
Emission Level Tier 4
Alternator 130amps

02 Driveline Specification

Ride Control System Yes
Service Brake Type Wet Disc
Parking Brake Type Wet Multi Disc
Differential Lock Front- Locking, Rear- Open
Service Brake Actuation Hydraulic
Tire Size - Standard 26.5 R25
Service Brake - Location All Wheels

03 Capacities Specification

Hydraulic Tank 43.7gal 165.3L
Heaped Capacity 5.3yd3 4m3
Transmission 7.4gal 27.9L

04 Operational Specification

Operating Weight 55807.9lb 25314kg
Fuel Capacity 126.1gal 477L
Front Axle/Diff Fluid Capacity 14.7gal 55.3L
Rear Axle/Diff Fluid Capacity 14.7gal 55.3L

05 Transmission Specification

Pump Flow 129.8gal/min 491L/min
System Pressure 222.7psi 1535.5kPa

06 Bucket Dimensions

Breakout - Bucket 19367 (42697) kgf (lbf)
Bucket Capacity - Smallest 5.24yd3 4m3
Largest Bucket Capacity 5.89yd3 4.5m3

07 Dimensions Dimensions

Ground Clearance 18.19in 462mm
Length With Bucket On Ground 29.6ft in 9020mm
Width Over Tires 10.12ft in 3084mm
Wheelbase 11.36ft in 3460mm
Hinge Pin - Max Height 14.05ft in 4280mm
Reach At Max Lift And Dump 6.21ft in 1890mm
Turning Circle 46.72ft in 14240mm
Height Over Cab 11.49ft in 3500mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.