Specification sheet Wheel Loader Ref john-deere-744h-mh-wheel-loader
John Deere 744H MH
The John Deere 744H MH is a wheel loader with an operating weight of 51,590 lb (23,400.84 kg), a 260 hp engine, and a 5.75 yd³ (4.41 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,590lb
23,400.84kg
Engine power
260hp
193.9kW
Net Power Bucket capacity
5.75yd³
4.41m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the John Deere 744H MH sits in the middle of its class:
- Operating weight 51,590 lb lighter than 59% (n=198)
- Engine power 260 hp less powerful than 73% (n=190)
- Bucket capacity 5.8 yd³ larger-bucket than 57% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6125A | |
| Net Power | 260hp | 193.9kw |
| Gross Power | 283hp | 211.1kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 980lb ft | 1330Nm |
| Displacement | 766cu in | 12.5L |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharged with Aftercooler | |
| Torque Rise | 40% |
02 Operational Specification
| Operating Weight | 51590lb | 23400.9kg |
|---|---|---|
| Fuel Capacity | 114gal | 432L |
| Hydraulic System Fluid Capacity | 38gal | 144L |
| Engine Oil Fluid Capacity | 10.1gal | 38L |
| Cooling System Fluid Capacity | 11.4gal | 43L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Rear Axle/Diff Fluid Capacity | 12.2gal | 46L |
| Static Tipping Weight | 36310lb | 16470kg |
| Turning Radius | 20.2ft in | 6140mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5-25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.5mph | 39.5km/h |
| Max Speed - Reverse | 19.3mph | 31km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3200psi | 22000kPa |
|---|---|---|
| Pump Flow Capacity | 112gal/min | 423L/min |
| Raise Time | 6.1sec | |
| Dump Time | 1.5sec | |
| Lower Time | 2.8sec | |
| Pump Type | Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.51ft in | 3202mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.75yd3 | 4.41m3 |
| Bucket Capacity - Struck | 5yd3 | 3.8m3 |
| Bucket Width | 10.75ft in | 3275mm |
| Breakout Force | 37175lb | 16860kN |
06 Dimensions Dimensions
| Ground Clearance | 1.53ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 29.29ft in | 8925mm |
| Width Over Tires | 9.65ft in | 2940mm |
| Height To Top Of Cab | 11.55ft in | 3520mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.8ft in | 4510mm |
| Reach At Max Lift And Dump | 6.24ft in | 1900mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.