Specification sheet Wheel Loader Ref john-deere-724j-wheel-loader

John Deere 724J

The John Deere 724J is a wheel loader with an operating weight of 51,057 lb (23,159.07 kg), a 250 hp engine, and a 4.75 yd³ (3.64 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
51,057lb
23,159.07kg
Engine power
250hp
186.5kW
Net Power
Bucket capacity
4.75yd³
3.64m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the John Deere 724J sits below the median for its class:

  • Operating weight 51,060 lb lighter than 67% (n=198)
  • Engine power 250 hp less powerful than 82% (n=190)
  • Bucket capacity 4.8 yd³ smaller-bucket than 86% (n=174)

Scale drawingdrawn to scale · mm

3412B453C8360A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2240
Engine Model 6081H
Net Power 250hp 186.5kw
Power Measured @ 1800rpm
Displacement 496cu in 8.2L
Torque Measured @ 1300rpm
Aspiration Turbocharged, charge air cooled
Torque Rise 49%

02 Operational Specification

Operating Weight 51057lb 23159.1kg
Fuel Capacity 100gal 378.6L
Hydraulic System Fluid Capacity 31gal 117.4L
Engine Oil Fluid Capacity 6.7gal 25L
Cooling System Fluid Capacity 8.2gal 31L
Transmission Fluid Capacity 7.2gal 27L
Turning Radius 18.1ft in 5500mm
Operating Voltage 24V
Alternator Supplied Amperage 80amps
Rear Axle Oscillation 26degrees

03 Transmission Specification

Transmission Type Countershaft-Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 22mph 35.5km/h
Max Speed - Reverse 55.5mph 89.4km/h

04 Hydraulic System Specification

Raise Time 6sec
Dump Time 1.2sec
Lower Time 30sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.46ft in 2883mm
Bucket Capacity - Struck 4.2yd3 3.22m3
Bucket Width 9.98ft in 3040mm
Bucket Capacity - Heaped 4.75yd3 3.64m3

06 Dimensions Dimensions

Ground Clearance 1.49ft in 453mm
Length With Bucket On Ground 27.43ft in 8360mm
Height To Top Of Cab 11.2ft in 3412mm
Wheelbase 10.5ft in 3200mm
Hinge Pin - Max Height 13.57ft in 4136mm
Reach At Max Lift And Dump 3.78ft in 1152mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.