Specification sheet Wheel Loader Ref john-deere-724j-wh-high-lift-wheel-loader
John Deere 724J WH High-Lift
The John Deere 724J WH High-Lift is a wheel loader with an operating weight of 51,546 lb (23,381 kg), a 215 hp engine, and a 5 yd³ (3.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
51,546lb
23,381kg
Engine power
215hp
160kW
Net Power Bucket capacity
5yd³
3.8m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the John Deere 724J WH High-Lift sits in the middle of its class:
- Operating weight 51,550 lb lighter than 59% (n=198)
- Engine power 215 hp less powerful than 93% (n=190)
- Bucket capacity 5 yd³ smaller-bucket than 78% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6081H | |
| Net Power | 215hp | 160kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 765lb ft | 1037Nm |
| Displacement | 496cu in | 8.1L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged charge air cooled | |
| Torque Rise | 49% |
02 Operational Specification
| Operating Weight | 51546lb | 23381kg |
|---|---|---|
| Fuel Capacity | 100gal | 379L |
| Hydraulic System Fluid Capacity | 31gal | 117L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 8.2gal | 31L |
| Transmission Fluid Capacity | 6.9gal | 26L |
| Front Axle/Diff Fluid Capacity | 7.7gal | 29L |
| Rear Axle/Diff Fluid Capacity | 7.7gal | 29L |
| Static Tipping Weight | 32780lb | 14869kg |
| Turning Radius | 22.3ft in | 6780mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 18degrees | |
| Tire Size | 23.5 -25 |
03 Transmission Specification
| Transmission Type | Automatic Powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 14.7mph | 23.7km/h |
| Max Speed - Reverse | 15.5mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600psi | 24850kPa |
|---|---|---|
| Pump Flow Capacity | 74gal/min | 280L/min |
| Raise Time | 6sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3sec | |
| Pump Type | Variable axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.3ft in | 3452mm |
|---|---|---|
| Bucket Capacity - Heaped | 5yd3 | 3.8m3 |
| Bucket Capacity - Struck | 4yd3 | 3.1m3 |
| Bucket Width | 9.52ft in | 2900mm |
| Breakout Force | 23075lb | 102.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.69ft in | 520mm |
|---|---|---|
| Length With Bucket On Ground | 27.75ft in | 8465mm |
| Width Over Tires | 9.42ft in | 2874mm |
| Height To Top Of Cab | 11.58ft in | 3530mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 15.17ft in | 4620mm |
| Reach At Max Lift And Dump | 3.78ft in | 1150mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.