Specification sheet Wheel Loader Ref john-deere-644k-hybrid-wheel-loader

John Deere 644K HYBRID

The John Deere 644K HYBRID is a wheel loader with an operating weight of 40,434.99 lb (18,341 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
40,434.99lb
18,341kg

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 644K HYBRID sits above the median for its class:

  • Operating weight 40,430 lb heavier than 85% (n=439)

Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.

01 Engine Specification

Pump Piston
Engine Output-Net 229.4hp 171kw
Transmission Type Powershift w/Hybrid-Electric Drive
Engine Make John Deere
Engine Model PowerTech PSX 6068
Torque 731lb ft 991Nm
Rated Speed 1700rpm
Displacement 415cu in 6.8L
Torque Rise 19%
System Voltage 24V
Emission Level Tier 4
Alternator 100amps

02 Driveline Specification

Ride Control System Optional
Service Brake Type Wet Disc
Parking Brake Type Wet Multi Disc - Transmission
Differential Lock Front- Locking, Rear- Open
Service Brake Actuation Hydraulic
Tire Size - Standard 23.5 R25
Service Brake - Location Axle Inboard

03 Capacities Specification

Hydraulic Tank 28.1gal 106L
Heaped Capacity 4.2yd3 3.2m3
Transmission 10.1gal 37.9L

04 Operational Specification

Operating Weight 40435lb 18341kg
Fuel Capacity 104.9gal 397L
Front Axle/Diff Fluid Capacity 5.9gal 22L
Rear Axle/Diff Fluid Capacity 5.9gal 22L

05 Transmission Specification

Pump Flow 78.5gal/min 297L/min
System Pressure 251.7psi 1735.2kPa

06 Bucket Dimensions

Breakout - Bucket 15378 (33903) kgf (lbf)
Bucket Capacity - Smallest 4.06yd3 3.1m3
Largest Bucket Capacity 4.19yd3 3.2m3

07 Dimensions Dimensions

Ground Clearance 18.15in 461mm
Length With Bucket On Ground 27.24ft in 8300mm
Width Over Tires 9.44ft in 2875mm
Wheelbase 10.7ft in 3260mm
Hinge Pin - Max Height 13.52ft in 4120mm
Reach At Max Lift And Dump 5.29ft in 1610mm
Turning Circle 43.57ft in 13280mm
Height Over Cab 11.26ft in 3430mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.