John Deere 624J Waste Handler
The John Deere 624J Waste Handler is a wheel loader with an operating weight of 39,762 lb (18,036 kg), a 167 hp engine, and a 3.5 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 624J Waste Handler sits above the median for its class:
- Operating weight 39,760 lb heavier than 84% (n=439)
- Engine power 167 hp more powerful than 52% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 58% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6068H | |
| Net Power | 167hp | 125kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 617lb ft | 837Nm |
| Displacement | 414cu in | 6.8L |
| Torque Measured @ | 1600rpm | |
| Aspiration | Turbocharged charge air cooled | |
| Torque Rise | 55% |
02 Operational Specification
| Operating Weight | 39762lb | 18036kg |
|---|---|---|
| Fuel Capacity | 93gal | 352L |
| Hydraulic System Fluid Capacity | 32gal | 121L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Static Tipping Weight | 28350lb | 12860kg |
| Turning Radius | 17ft in | 5181.6mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | Automatic Powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 15.2mph | 24.5km/h |
| Max Speed - Reverse | 16mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3675psi | 25320kPa |
|---|---|---|
| Pump Flow Capacity | 60gal/min | 227L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.3sec | |
| Lower Time | 2.7sec | |
| Pump Type | Variable axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.08ft in | 2770mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.5yd3 | 2.7m3 |
| Bucket Capacity - Struck | 3.01yd3 | 2.3m3 |
| Bucket Width | 8.83ft in | 2691.39mm |
| Breakout Force | 25567lb | 113.7kN |
06 Dimensions Dimensions
| Ground Clearance ‡ — value corrected — the source published it under the wrong unit | 1.54ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 40.5ft in | 12340mm |
| Width Over Tires ‡ — value corrected — the source published it under the wrong unit | 8.47ft in | 2582mm |
| Height To Top Of Cab | 11.17ft in | 3400mm |
| Wheelbase | 9.92ft in | 3020mm |
| Hinge Pin - Max Height | 13.17ft in | 4010mm |
| Reach At Max Lift And Dump | 3.38ft in | 1030mm |
Data notes
Corrected value. The source published these figures under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.
- Ground Clearance: shown as 1.54 ft in (source stated a value inconsistent with its own metric figure of 470 mm)
- Width Over Tires: shown as 8.47 ft in (source stated a value inconsistent with its own metric figure of 2582 mm)
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.