Specification sheet Wheel Loader Ref john-deere-624j-waste-handler-high-lift-wheel-loader
John Deere 624J Waste Handler High-Lift
The John Deere 624J Waste Handler High-Lift is a wheel loader with an operating weight of 39,715 lb (18,015 kg), a 198 hp engine, and a 4 yd³ (3.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
39,715lb
18,015kg
Engine power
198hp
147.7kW
Net Power Bucket capacity
4yd³
3.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 624J Waste Handler High-Lift sits above the median for its class:
- Operating weight 39,720 lb heavier than 83% (n=439)
- Engine power 198 hp more powerful than 75% (n=408)
- Bucket capacity 4 yd³ larger-bucket than 77% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6068H | |
| Net Power | 198hp | 147.7kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 617lb ft | 837Nm |
| Displacement | 414cu in | 6.8L |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged | |
| Torque Rise | 55% |
02 Operational Specification
| Operating Weight | 39715lb | 18015kg |
|---|---|---|
| Fuel Capacity | 93gal | 352L |
| Hydraulic System Fluid Capacity | 32gal | 121L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Static Tipping Weight | 24754lb | 11228kg |
| Turning Radius | 17ft in | 5180mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 16degrees | |
| Tire Size | 20.5 -25 |
03 Transmission Specification
| Transmission Type | Automactic Powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 15.2mph | 24.5km/h |
| Max Speed - Reverse | 16mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3675psi | 25320kPa |
|---|---|---|
| Pump Flow Capacity | 60gal/min | 227L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.3sec | |
| Lower Time | 2.7sec | |
| Pump Type | Variable axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.83ft in | 3310mm |
|---|---|---|
| Bucket Capacity - Heaped | 4yd3 | 3.1m3 |
| Bucket Capacity - Struck | 3.5yd3 | 2.7m3 |
| Bucket Width | 9.58ft in | 2919.99mm |
| Breakout Force | 23137lb | 102.9kN |
06 Dimensions Dimensions
| Ground Clearance | 1.56ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 24.75ft in | 7543.8mm |
| Width Over Tires | 8.42ft in | 2573mm |
| Height To Top Of Cab | 11.17ft in | 3400mm |
| Wheelbase | 9.92ft in | 3020mm |
| Hinge Pin - Max Height | 14.33ft in | 4370mm |
| Reach At Max Lift And Dump | 5.92ft in | 1810mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.