John Deere 624J Powerllel w/QC & fork
The John Deere 624J Powerllel w/QC & fork is a wheel loader with an operating weight of 35,102 lb (15,922 kg), a 167 hp engine, and a 3.5 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 624J Powerllel w/QC & fork sits above the median for its class:
- Operating weight 35,100 lb heavier than 67% (n=439)
- Engine power 167 hp more powerful than 52% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 58% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2240 | |
|---|---|---|
| Engine Model | 6068H | |
| Net Power | 167hp | 125kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 617lb ft | 836Nm |
| Displacement | 414cu in | 6.8L |
| Aspiration | Turbocharged charge air cooled | |
| Torque Rise | 55% |
02 Operational Specification
| Operating Weight | 35102lb | 15922kg |
|---|---|---|
| Fuel Capacity | 93gal | 352L |
| Hydraulic System Fluid Capacity | 32gal | 119L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 5.9gal | 22L |
| Rear Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Static Tipping Weight | 19590lb | 8886kg |
| Turning Radius | 17ft in | 5181.6mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Automatic Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.6mph | 39.6km/h |
| Max Speed - Reverse | 16mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3675psi | 25320kPa |
|---|---|---|
| Pump Flow Capacity | 60gal/min | 227L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 2.8sec | |
| Pump Type | Variable axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.92ft in | 2718.82mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.5yd3 | 2.7m3 |
| Bucket Width | 8.5ft in | 2590.81mm |
| Breakout Force | 23719lb | 105.51kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 26.58ft in | 8100mm |
|---|---|---|
| Width Over Tires ‡ — value corrected — the source published it under the wrong unit | 8.47ft in | 2582mm |
| Height To Top Of Cab | 10.92ft in | 3330mm |
| Wheelbase | 9.92ft in | 3020mm |
| Hinge Pin - Max Height | 13.17ft in | 4010mm |
?Questions & answersfrom this machine's data
- How much does a John Deere 624J Powerllel w/QC & fork wheel loader weigh?
- A John Deere 624J Powerllel w/QC & fork wheel loader has an operating weight of 35,102 lb (15,922 kg).
- What engine does a John Deere 624J Powerllel w/QC & fork wheel loader have?
- A John Deere 624J Powerllel w/QC & fork wheel loader is powered by a 6068H engine producing 167 hp (125 kW).
- What size bucket does a John Deere 624J Powerllel w/QC & fork wheel loader have?
- A John Deere 624J Powerllel w/QC & fork wheel loader has a bucket capacity of 3.5 yd³ (2.7 m³).
- How much fuel does a John Deere 624J Powerllel w/QC & fork wheel loader hold?
- A John Deere 624J Powerllel w/QC & fork wheel loader has a fuel capacity of 93 gal (352 L).
- How long is a John Deere 624J Powerllel w/QC & fork wheel loader?
- A John Deere 624J Powerllel w/QC & fork wheel loader has an overall length of 26.6 ft (8,100 mm) with the bucket on the ground.
- How fast does a John Deere 624J Powerllel w/QC & fork wheel loader travel?
- A John Deere 624J Powerllel w/QC & fork wheel loader has a maximum forward travel speed of 24.6 mph (39.6 km/h).
Data notes
Corrected value. The source published this figure under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.
- Width Over Tires: shown as 8.47 ft in (source stated a value inconsistent with its own metric figure of 2582 mm)
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.