Specification sheet Wheel Loader Ref john-deere-624h-waste-handler-wheel-loader
John Deere 624H Waste Handler
The John Deere 624H Waste Handler is a wheel loader with an operating weight of 38,859 lb (17,623 kg), a 160 hp engine, and a 4 yd³ (3.06 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,859lb
17,623kg
Engine power
160hp
119kW
Net Power Bucket capacity
4yd³
3.06m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 624H Waste Handler sits above the median for its class:
- Operating weight 38,860 lb heavier than 79% (n=439)
- Engine power 160 hp less powerful than 56% (n=408)
- Bucket capacity 4 yd³ larger-bucket than 77% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6068H | |
| Net Power | 160hp | 119kw |
| Gross Power | 172hp | 128kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 575lb ft | 720Nm |
| Displacement | 414cu in | 6.8L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharger with Aftercooler |
02 Operational Specification
| Operating Weight | 38859lb | 17623kg |
|---|---|---|
| Fuel Capacity | 70gal | 265L |
| Hydraulic System Fluid Capacity | 31gal | 117L |
| Engine Oil Fluid Capacity | 5.3gal | 20L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 7.2gal | 27L |
| Front Axle/Diff Fluid Capacity | 7.4gal | 28L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 23860lb | 10821kg |
| Turning Radius | 17.1ft in | 5187mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 18degrees | |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 15mph | 24.1km/h |
| Max Speed - Reverse | 16mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600psi | 24850kPa |
|---|---|---|
| Pump Flow Capacity | 55gal/min | 200L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.16ft in | 3399mm |
|---|---|---|
| Bucket Capacity - Heaped | 4yd3 | 3.06m3 |
| Bucket Capacity - Struck | 3.1yd3 | 2.37m3 |
| Bucket Width | 10.67ft in | 3251mm |
| Breakout Force | 30312lb | 13747kN |
06 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 457mm |
|---|---|---|
| Length With Bucket On Ground | 25.21ft in | 7682mm |
| Width Over Tires | 8.44ft in | 2572mm |
| Height To Top Of Cab | 11ft in | 3351mm |
| Wheelbase | 9.95ft in | 3030mm |
| Hinge Pin - Max Height | 14.37ft in | 4379mm |
| Reach At Max Lift And Dump | 3.01ft in | 917mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.