John Deere 60G Specifications

Operating weight

13,547.5lb

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the John Deere 60G sits at the heavy end of its class:

Operating weight 13,550 lb heavier than 94% (n=438)

Not positioned on engine power, dig depth — withheld or unpublished for this machine.

01 Dimensions Specification

Ground Clearance	1.12ft in	341mm‖ — metric converted from the published imperial value
Tail Swing Radius	4.27ft in	1,301mm‖ — metric converted from the published imperial value
Track Gauge	5.25ft in	1,600mm‖ — metric converted from the published imperial value
Dozer Blade Height	16.54in	420.1mm‖ — metric converted from the published imperial value
Dozer Blade Width	78.75in	2,000mm‖ — metric converted from the published imperial value
Dump Height - Mono Boom	13.69ft in	4,173mm‖ — metric converted from the published imperial value
Overall Width	6.57ft in	2,003mm‖ — metric converted from the published imperial value
Standard Dipper	4.93ft in	1,503mm‖ — metric converted from the published imperial value
Track Length On Ground	78.35ft in	23,881mm‖ — metric converted from the published imperial value
Transport Height	8.34ft in	2,542mm‖ — metric converted from the published imperial value
Transport Length Mono Boom	18.9ft in	5,761mm‖ — metric converted from the published imperial value
Undercarriage Overall Length	8.21ft in	2,502mm‖ — metric converted from the published imperial value
Dig Depth - Mono Boom	12.37ft in	3,770mm‖ — metric converted from the published imperial value
Width Over Standard Tracks	6.57ft in	2,003mm‖ — metric converted from the published imperial value
Dig Height - Mono Boom	19.56ft in	5,962mm‖ — metric converted from the published imperial value
Digging Reach - Mono Boom	20.44ft in	6,230mm‖ — metric converted from the published imperial value

02 Driveline Specification

Displacement	201.4cu in	3,300cm3‖ — metric converted from the published imperial value
Engine Manufacturer	Yanmar
Engine Output	53.2hp	39.7kw‖ — metric converted from the published imperial value
Emission Rating	Tier 4
Rated Speed	2000rpm
Track Shoe Width	15.8in	401mm‖ — metric converted from the published imperial value
Number Of Cylinders	4
Number Of Carrier Rollers - Each Side	1
Number Of Track Rollers - Each Side	4

03 Capacities Specification

Fuel Tank - Diesel	31.8gal	120l‖ — metric converted from the published imperial value
Hydraulic Tank	21.2gal	80.3l‖ — metric converted from the published imperial value
System Voltage	12V
Number Of Batteries	1

04 Performance Specification

Travel Speed	3mph	5km/h‖ — metric converted from the published imperial value
Slew Speed	9.5rpm
Ground Bearing Pressure	5.2psi	36kpa‖ — metric converted from the published imperial value
Breakout - Bucket	8273lb	3,753kg‖ — metric converted from the published imperial value
Dipper Tearout	6991.6lb	3,171.3kg‖ — metric converted from the published imperial value
Main Pumps - Maximum Flow	38.1gal/min	144l/min‖ — metric converted from the published imperial value

05 Weights Specification

Operating Weight	13547.5lb	6,145.04kg‖ — metric converted from the published imperial value

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.