Specification sheet Wheel Loader Ref john-deere-544j-powerllel-w-qc-fork-wheel-loader
John Deere 544J Powerllel w/ QC & Fork
The John Deere 544J Powerllel w/ QC & Fork is a wheel loader with an operating weight of 29,648 lb (13,448 kg), a 149 hp engine, and a 3 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,648lb
13,448kg
Engine power
149hp
111kW
Net Power Bucket capacity
3yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 544J Powerllel w/ QC & Fork sits in the middle of its class:
- Operating weight 29,650 lb lighter than 56% (n=439)
- Engine power 149 hp less powerful than 66% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6068H | |
| Net Power | 149hp | 111kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 496lb ft | 673Nm |
| Displacement | 414cu in | 6.8L |
| Aspiration | Turbocharged charge air cooled | |
| Torque Rise | 38% |
02 Operational Specification
| Operating Weight | 29648lb | 13448kg |
|---|---|---|
| Fuel Capacity | 85gal | 322L |
| Hydraulic System Fluid Capacity | 26gal | 97L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Transmission Fluid Capacity | 4.9gal | 18.5L |
| Front Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Rear Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Static Tipping Weight | 16737lb | 7591.8kg |
| Turning Radius | 16.3ft in | 4953mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 80amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Automatic Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.8mph | 38.3km/h |
| Max Speed - Reverse | 15mph | 24.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3650psi | 25150kPa |
|---|---|---|
| Pump Flow Capacity | 50gal/min | 189L/min |
| Raise Time | 5.5sec | |
| Dump Time | 1.4sec | |
| Lower Time | 2.5sec | |
| Pump Type | Variable axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.75ft in | 2667mm |
|---|---|---|
| Bucket Capacity - Heaped | 3yd3 | 2.3m3 |
| Bucket Width | 8.83ft in | 2691.39mm |
| Breakout Force | 18968lb | 8604kN |
06 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 434mm |
|---|---|---|
| Length With Bucket On Ground | 25.92ft in | 7900mm |
| Height To Top Of Cab | 10.67ft in | 3250mm |
| Wheelbase | 9.67ft in | 2950mm |
| Hinge Pin - Max Height | 12.67ft in | 3860mm |
| Reach At Max Lift And Dump | 3.83ft in | 1160mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.