Specification sheet Wheel Loader Ref john-deere-544gtc-wheel-loader
John Deere 544GTC
The John Deere 544GTC is a wheel loader with an operating weight of 24,621.23 lb (11,168 kg), and a 120 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,621.23lb
11,168kg
Engine power
120hp
89.49kW
Gross Power ◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 544GTC sits at the compact end of its class:
- Operating weight 24,620 lb lighter than 86% (n=439)
- Engine power 120 hp less powerful than 90% (n=408)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Engine Model | 5afb2a.pdf | |
|---|---|---|
| Gross Power | 120hp | 89.5kw |
| Displacement | 359.1cu in | 5.9L |
02 Operational Specification
| Operating Weight | 24621.3lb | 11168kg |
|---|---|---|
| Fuel Capacity | 57.6gal | 218L |
| Hydraulic System Fluid Capacity | 20.1gal | 76L |
| Engine Oil Fluid Capacity | 5.1gal | 19L |
| Cooling System Fluid Capacity | 6.3gal | 23.5L |
| Transmission Fluid Capacity | 2.6gal | 9.5L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 15.5-25,12PRL2 |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.8mph | 38.4km/h |
| Max Speed - Reverse | 17.2mph | 27.7km/h |
04 Dimensions Dimensions
| Ground Clearance | 1.23ft in | 373mm |
|---|---|---|
| Length With Bucket On Ground | 23.3ft in | 7100mm |
| Width Over Tires | 8.08ft in | 2460mm |
| Wheelbase | 9.52ft in | 2900mm |
| Reach At Max Lift And Dump | 3.48ft in | 1060mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.