Specification sheet Wheel Loader Ref john-deere-544gh-wheel-loader
John Deere 544GH
The John Deere 544GH is a wheel loader with an operating weight of 23,677 lb (10,738 kg), a 125 hp engine, and a 2.5 yd³ (1.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,677lb
10,738kg
Engine power
125hp
93kW
Net Power Bucket capacity
2.5yd³
1.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 544GH sits at the compact end of its class:
- Operating weight 23,680 lb lighter than 90% (n=439)
- Engine power 125 hp less powerful than 88% (n=408)
- Bucket capacity 2.5 yd³ smaller-bucket than 81% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6059T | |
| Net Power | 125hp | 93kw |
| Gross Power | 130hp | 97kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 373lb ft | 506Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 23677lb | 10738kg |
|---|---|---|
| Fuel Capacity | 57.6gal | 218L |
| Hydraulic System Fluid Capacity | 6.4gal | 24L |
| Engine Oil Fluid Capacity | 5.1gal | 19L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 2.6gal | 9.5L |
| Front Axle/Diff Fluid Capacity | 5.1gal | 19L |
| Rear Axle/Diff Fluid Capacity | 5.1gal | 19L |
| Static Tipping Weight | 17895lb | 8116kg |
| Turning Radius | 16.3ft in | 4953mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Power Shift w/ Torque Converter | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.8mph | 38.4km/h |
| Max Speed - Reverse | 16.9mph | 27.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18961kPa |
|---|---|---|
| Pump Flow Capacity | 46.3gal/min | 175L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.2sec | |
| Pump Type | Gear Type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.37ft in | 2853mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.5yd3 | 1.9m3 |
| Bucket Capacity - Struck | 2.12yd3 | 1.62m3 |
| Bucket Width | 8.37ft in | 2550mm |
| Breakout Force | 22207lb | 98.8kN |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 439mm |
|---|---|---|
| Length With Bucket On Ground | 22.68ft in | 6910mm |
| Width Over Tires | 7.94ft in | 2420mm |
| Height To Top Of Cab | 10.58ft in | 3224.79mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.44ft in | 3790mm |
| Reach At Max Lift And Dump | 3.03ft in | 922mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.