Specification sheet Wheel Loader Ref john-deere-544eh-wheel-loader
John Deere 544EH
The John Deere 544EH is a wheel loader with an operating weight of 23,384 lb (10,606.81 kg), a 125 hp engine, and a 2.5 yd³ (1.92 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,384lb
10,606.81kg
Engine power
125hp
93.3kW
Net Power Bucket capacity
2.5yd³
1.92m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 544EH sits at the compact end of its class:
- Operating weight 23,380 lb lighter than 93% (n=439)
- Engine power 125 hp less powerful than 88% (n=408)
- Bucket capacity 2.5 yd³ smaller-bucket than 81% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6359T | |
| Net Power | 125hp | 93.3kw |
| Gross Power | 130hp | 97kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 372lb ft | 504Nm |
| Displacement | 359cu in | 5.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 23384lb | 10606.9kg |
|---|---|---|
| Fuel Capacity | 55gal | 208L |
| Hydraulic System Fluid Capacity | 20.1gal | 76L |
| Engine Oil Fluid Capacity | 5.1gal | 19L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 2.6gal | 9.5L |
| Front Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Rear Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Static Tipping Weight | 17496lb | 7936.1kg |
| Turning Radius | 16.2ft in | 4930mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 25.4mph | 40.9km/h |
| Max Speed - Reverse | 17.9mph | 28.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18960.6kPa |
|---|---|---|
| Pump Flow Capacity | 46.3gal/min | 175.3L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.2sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2852mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.5yd3 | 1.92m3 |
| Bucket Capacity - Struck | 2.12yd3 | 1.63m3 |
| Bucket Width | 8.37ft in | 2550mm |
| Breakout Force | 20558lb | 91.45kN |
06 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 456mm |
|---|---|---|
| Length With Bucket On Ground | 22.68ft in | 6910mm |
| Width Over Tires | 7.94ft in | 2420mm |
| Height To Top Of Cab | 10.54ft in | 3210mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.44ft in | 3790mm |
| Reach At Max Lift And Dump | 3.04ft in | 924mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.