Specification sheet Wheel Loader Ref john-deere-544d-wheel-loader
John Deere 544D
The John Deere 544D is a wheel loader with an operating weight of 22,660 lb (10,280 kg), a 115 hp engine, and a 2 yd³ (1.53 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,660lb
10,280kg
Engine power
115hp
86kW
Net Power Bucket capacity
2yd³
1.53m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 544D sits at the compact end of its class:
- Operating weight 22,660 lb lighter than 96% (n=439)
- Engine power 115 hp less powerful than 96% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 96% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6-414T | |
| Net Power | 115hp | 86kw |
| Gross Power | 122hp | 91kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 352lb ft | 477.3Nm |
| Displacement | 414cu in | 6.8L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 22660lb | 10280kg |
|---|---|---|
| Fuel Capacity | 50gal | 189.3L |
| Hydraulic System Fluid Capacity | 16.2gal | 61L |
| Engine Oil Fluid Capacity | 5.1gal | 19L |
| Cooling System Fluid Capacity | 6.1gal | 23L |
| Transmission Fluid Capacity | 9.8gal | 37L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Static Tipping Weight | 16210lb | 7352.8kg |
| Turning Radius | 14.6ft in | 4444mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 42amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Power shift Planetary | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 27.9mph | 45km/h |
| Max Speed - Reverse | 9.9mph | 16km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2625psi | 18099kPa |
|---|---|---|
| Pump Flow Capacity | 49.2gal/min | 186.3L/min |
| Raise Time | 5.7sec | |
| Dump Time | 1.9sec | |
| Lower Time | 4.2sec | |
| Pump Type | Gear type pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.51ft in | 2896mm |
|---|---|---|
| Bucket Capacity - Heaped | 2yd3 | 1.53m3 |
| Bucket Capacity - Struck | 1.64yd3 | 1.26m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 20520lb | 9310kN |
06 Dimensions Dimensions
| Ground Clearance | 1.44ft in | 436mm |
|---|---|---|
| Length With Bucket On Ground | 20.5ft in | 6248.4mm |
| Width Over Tires | 7.45ft in | 2270mm |
| Height To Top Of Cab | 10.08ft in | 3070mm |
| Wheelbase | 8.5ft in | 2590mm |
| Hinge Pin - Max Height | 11.98ft in | 3650mm |
| Reach At Max Lift And Dump | 2.94ft in | 894mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.