John Deere 50G Specifications

Operating weight

10,846.8lb

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the John Deere 50G sits at the heavy end of its class:

Operating weight 10,850 lb heavier than 90% (n=438)

Not positioned on engine power, dig depth — withheld or unpublished for this machine.

01 Dimensions Specification

Ground Clearance	1.12ft in	341mm‖ — metric converted from the published imperial value
Tail Swing Radius	3.29ft in	1,003mm‖ — metric converted from the published imperial value
Track Gauge	5.25ft in	1,600mm‖ — metric converted from the published imperial value
Dozer Blade Height	14.77in	375.2mm‖ — metric converted from the published imperial value
Dozer Blade Width	78.75in	2,000mm‖ — metric converted from the published imperial value
Dump Height - Mono Boom	13.36ft in	4,072mm‖ — metric converted from the published imperial value
Overall Width	6.57ft in	2,003mm‖ — metric converted from the published imperial value
Standard Dipper	4.53ft in	1,381mm‖ — metric converted from the published imperial value
Track Length On Ground	78.75ft in	24,003mm‖ — metric converted from the published imperial value
Transport Height	8.31ft in	2,533mm‖ — metric converted from the published imperial value
Transport Length Mono Boom	17.95ft in	5,471mm‖ — metric converted from the published imperial value
Undercarriage Overall Length	8.21ft in	2,502mm‖ — metric converted from the published imperial value
Dig Depth - Mono Boom	11.59ft in	3,533mm‖ — metric converted from the published imperial value
Width Over Standard Tracks	6.57ft in	2,003mm‖ — metric converted from the published imperial value
Dig Height - Mono Boom	18.87ft in	5,752mm‖ — metric converted from the published imperial value
Digging Reach - Mono Boom	19.56ft in	5,962mm‖ — metric converted from the published imperial value

02 Driveline Specification

Displacement	100.3cu in	1,644cm3‖ — metric converted from the published imperial value
Engine Manufacturer	Yanmar
Engine Output	35.9hp	26.8kw‖ — metric converted from the published imperial value
Emission Rating	Tier 4
Rated Speed	2400rpm
Track Shoe Width	15.8in	401mm‖ — metric converted from the published imperial value
Number Of Cylinders	3
Number Of Carrier Rollers - Each Side	1
Number Of Track Rollers - Each Side	4

03 Capacities Specification

System Voltage	12V
Number Of Batteries	1

04 Performance Specification

Travel Speed	2.7mph	4.3km/h‖ — metric converted from the published imperial value
Slew Speed	9rpm
Ground Bearing Pressure	4.6psi	32kpa‖ — metric converted from the published imperial value
Breakout - Bucket	8273lb	3,753kg‖ — metric converted from the published imperial value
Dipper Tearout	24
Main Pumps - Maximum Flow	31.8gal/min	120l/min‖ — metric converted from the published imperial value

05 Weights Specification

Operating Weight	10846.8lb	4,920.02kg‖ — metric converted from the published imperial value

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.