John Deere 50
The John Deere 50 is a mini excavator with an operating weight of 9,270 lb, a 39 hp engine, and a dig depth of 11.49 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the John Deere 50 sits above the median for its class:
- Operating weight 9,270 lb heavier than 83% (n=438)
- Engine power 39 hp more powerful than 83% (n=448)
- Dig depth 11.5 ft deeper-digging than 87% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 17.82ft in | 5,432mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 8.04ft in | 2,451mm‖ — metric converted from the published imperial value |
| Max Loading Height | 10.67ft in | 3,252mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.25ft in | 5,563mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.49ft in | 3,502mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 6ft in | 1,829mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 1.09ft in | 332mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.04ft in | 2,451mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.89ft in | 1,490mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 14.97in | 380.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 4.73ft in | 1,442mm‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 4 | |
| Ground Pressure | 3.88psi | 26.8kpa‖ — metric converted from the published imperial value |
| Number Of Shoes Per Side | 37 | |
| Number Of Track Rollers Per Side | 1 | |
| Max Travel Speed | 2.25mph | 3.62km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TN78T-RJB | |
| Net Power | 39hp | 29kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2650rpm | |
| Displacement | 100cu in | 1,639cm3‖ — metric converted from the published imperial value |
| Max Torque | 92lb ft | |
| Torque Measured @ | 1800rpm |
05 Operational Specification
| Operating Weight | 9270lb | 4,205kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 14.3gal | 54.1l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 2gal | 8l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 27.7gal | 105l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 2gal | 8l‖ — metric converted from the published imperial value |
| Swing Drive Fluid Capacity | 0.7gal | 3l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 35amps | |
| Hydraulic System Relief Valve Pressure | 2420psi | 16,685kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 33.4gal/min | 126l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10.7rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.