Specification sheet Wheel Loader Ref john-deere-444k-wheel-loader

John Deere 444K

The John Deere 444K is a wheel loader with an operating weight of 25,022.47 lb (11,350 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
25,022.47lb
11,350kg

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the John Deere 444K sits below the median for its class:

  • Operating weight 25,020 lb lighter than 83% (n=439)

Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.

01 Engine Specification

Pump Piston
Engine Output-Net 123.4hp 92kw
Transmission Type Powershift
Engine Make John Deere
Engine Model PowerTech PSS 4045
Torque 374lb ft 507Nm
Rated Speed 2100rpm
Displacement 274.7cu in 4.5L
Torque Rise 34%
System Voltage 24V
Emission Level Tier 4
Alternator 100amps

02 Driveline Specification

Ride Control System Optional
Service Brake Type Wet Multi Disc
Parking Brake Type Wet Multi Disc
Differential Lock Front- Locking, Rear- Open
Service Brake Actuation Hydraulic
Tire Size - Standard 17.5 R25
Service Brake - Location All Wheels

03 Capacities Specification

Hydraulic Tank 31.4gal 118.7L
Heaped Capacity 2.5yd3 1.9m3
Transmission 4.9gal 18.5L

04 Operational Specification

Operating Weight 25022.5lb 11350kg
Fuel Capacity 58.2gal 220L
Front Axle/Diff Fluid Capacity 5.9gal 22L
Rear Axle/Diff Fluid Capacity 5.9gal 22L

05 Transmission Specification

Pump Flow 37gal/min 140L/min
System Pressure 248.3psi 1711.4kPa

06 Bucket Dimensions

Breakout - Bucket 7960 (17549) kgf (lbf)
Bucket Capacity - Smallest 2.49yd3 1.9m3
Largest Bucket Capacity 4.06yd3 3.1m3

07 Dimensions Dimensions

Ground Clearance 15.48in 393mm
Length With Bucket On Ground 22.51ft in 6860mm
Width Over Tires 7.93ft in 2415mm
Wheelbase 9.06ft in 2760mm
Hinge Pin - Max Height 11.82ft in 3600mm
Reach At Max Lift And Dump 4.73ft in 1440mm
Turning Circle 38.23ft in 11650mm
Height Over Cab 10.41ft in 3170mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.