Specification sheet Wheel Loader Ref john-deere-444e-wheel-loader
John Deere 444E
The John Deere 444E is a wheel loader with an operating weight of 18,871 lb (8,559.75 kg), a 95 hp engine, and a 1.75 yd³ (1.34 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,871lb
8,559.75kg
Engine power
95hp
70.9kW
Net Power Bucket capacity
1.75yd³
1.34m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 444E sits above the median for its class:
- Operating weight 18,870 lb heavier than 83% (n=374)
- Engine power 95 hp more powerful than 75% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 72% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4276T | |
| Net Power | 95hp | 70.9kw |
| Gross Power | 100hp | 74.6kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 284lb ft | 385.1Nm |
| Displacement | 276cu in | 4.6L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 18871lb | 8559.8kg |
|---|---|---|
| Fuel Capacity | 37gal | 140.1L |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 9gal | 34L |
| Transmission Fluid Capacity | 2gal | 7.5L |
| Front Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Rear Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Static Tipping Weight | 14487lb | 6571.2kg |
| Turning Radius | 15ft in | 4570mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 20mph | 32.2km/h |
| Max Speed - Reverse | 20mph | 32.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2987psi | 20594.7kPa |
|---|---|---|
| Pump Flow Capacity | 38.8gal/min | 146.9L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1sec | |
| Lower Time | 3.1sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.26ft in | 2820mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.75yd3 | 1.34m3 |
| Bucket Capacity - Struck | 1.53yd3 | 1.17m3 |
| Bucket Width | 7.94ft in | 2420mm |
| Breakout Force | 18298lb | 81.4kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 430mm |
|---|---|---|
| Length With Bucket On Ground | 20.81ft in | 6340mm |
| Width Over Tires | 7.37ft in | 2244mm |
| Height To Top Of Cab | 10.41ft in | 3170mm |
| Wheelbase | 8.7ft in | 2650mm |
| Hinge Pin - Max Height | 11.75ft in | 3580mm |
| Reach At Max Lift And Dump | 2.79ft in | 848mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.