Specification sheet Wheel Loader Ref john-deere-444c-wheel-loader

John Deere 444C

The John Deere 444C is a wheel loader with an operating weight of 19,414 lb (8,806.05 kg), and a 85 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
19,414lb
8,806.05kg
Engine power
85hp
63.4kW
Net Power

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the John Deere 444C sits at the heavy end of its class:

  • Operating weight 19,410 lb heavier than 88% (n=374)
  • Engine power 85 hp more powerful than 68% (n=367)

Not positioned on bucket capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2980B392C6480A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2240
Net Power 85hp 63.4kw
Gross Power 95hp 70.8kw
Power Measured @ 2400rpm
Max Torque 228lb ft 309Nm
Displacement 329cu in 5.4L
Torque Measured @ 1200rpm
Aspiration Natural
Torque Rise 22%

02 Operational Specification

Operating Weight 19414lb 8806.1kg
Fuel Capacity 40gal 151.5L
Hydraulic System Fluid Capacity 14.1gal 53L
Engine Oil Fluid Capacity 3.1gal 11.4L
Cooling System Fluid Capacity 6.3gal 23.7L
Transmission Fluid Capacity 10.1gal 37.9L
Front Axle/Diff Fluid Capacity 4.3gal 16.1L
Rear Axle/Diff Fluid Capacity 4.3gal 16.1L
Static Tipping Weight 8418lb 3818.4kg
Turning Radius 13.9ft in 4220mm
Operating Voltage 12V
Rear Axle Oscillation 22degrees
Tire Size 15.5-25

03 Transmission Specification

Transmission Type Power Shift
Number Of Forward Gears 4
Number Of Reverse Gears 2
Max Speed - Forward 22.5mph 36.2km/h
Max Speed - Reverse 8.5mph 13.7km/h

04 Hydraulic System Specification

Relief Valve Setting 2250psi 15513.2kPa
Pump Flow Capacity 39.9gal/min 151.1L/min
Raise Time 5.8sec
Dump Time 1.6sec
Lower Time 4sec
Pump Type Piston Pump

05 Dimensions Dimensions

Ground Clearance 1.29ft in 392mm
Length With Bucket On Ground 21.26ft in 6480mm
Height To Top Of Cab 9.78ft in 2980mm
Wheelbase 7.88ft in 2400mm
Hinge Pin - Max Height 11.36ft in 3460mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.