Specification sheet Wheel Loader Ref john-deere-444-wheel-loader

John Deere 444

The John Deere 444 is a wheel loader with an operating weight of 18,870 lb (8,559.29 kg), and a 85 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
18,870lb
8,559.29kg
Engine power
85hp
63.4kW
Net Power

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the John Deere 444 sits above the median for its class:

  • Operating weight 18,870 lb heavier than 82% (n=374)
  • Engine power 85 hp more powerful than 68% (n=367)

Not positioned on bucket capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

3100B394C6605A
Side elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2240
Net Power 85hp 63.4kw
Gross Power 95hp 70.8kw
Power Measured @ 2400rpm
Max Torque 228lb ft 309Nm
Displacement 329cu in 5.4L
Torque Measured @ 1400rpm
Aspiration Natural

02 Operational Specification

Operating Weight 18870lb 8559.3kg
Fuel Capacity 40gal 151.5L
Hydraulic System Fluid Capacity 13gal 49.2L
Engine Oil Fluid Capacity 3.1gal 11.4L
Cooling System Fluid Capacity 8.1gal 30.3L
Transmission Fluid Capacity 10.1gal 37.9L
Front Axle/Diff Fluid Capacity 4.3gal 16.1L
Rear Axle/Diff Fluid Capacity 4.3gal 16.1L
Static Tipping Weight 10122lb 4591.3kg
Turning Radius 13.9ft in 4220mm
Operating Voltage 12V
Rear Axle Oscillation 22degrees
Tire Size 15.5-25

03 Transmission Specification

Transmission Type Powershift Planetary
Number Of Forward Gears 4
Number Of Reverse Gears 2
Max Speed - Forward 22.5mph 36.2km/h
Max Speed - Reverse 8.5mph 13.7km/h

04 Hydraulic System Specification

Relief Valve Setting 2250psi 15513.2kPa
Pump Flow Capacity 39.5gal/min 149.6L/min
Pump Type Engine driven vane

05 Dimensions Dimensions

Ground Clearance 1.3ft in 394mm
Length With Bucket On Ground 21.67ft in 6605.02mm
Height To Top Of Cab 10.17ft in 3099.82mm
Wheelbase 7.88ft in 2400mm
Hinge Pin - Max Height 11.17ft in 3404.62mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.