John Deere 35G
The John Deere 35G is a mini excavator with an operating weight of 7,760.3 lb.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the John Deere 35G sits above the median for its class:
- Operating weight 7,760 lb heavier than 68% (n=438)
Not positioned on engine power, dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
02 Driveline Specification
| Displacement | 100.3cu in | 1,644cm3‖ — metric converted from the published imperial value |
|---|---|---|
| Engine Manufacturer | Yanmar | |
| Engine Output | 23.4hp | 17.4kw‖ — metric converted from the published imperial value |
| Emission Rating | Tier 4 | |
| Rated Speed | 2400rpm | |
| Track Shoe Width | 11.9in | 302mm‖ — metric converted from the published imperial value |
| Number Of Cylinders | 3 | |
| Number Of Carrier Rollers - Each Side | 1 | |
| Number Of Track Rollers - Each Side | 4 |
03 Capacities Specification
| Fuel Tank - Diesel | 11.1gal | 42l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank | 8.5gal | 32l‖ — metric converted from the published imperial value |
| System Voltage | 12V | |
| Number Of Batteries | 1 |
04 Performance Specification
| Travel Speed | 2.7mph | 4.3km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Slew Speed | 19.8rpm | |
| Ground Bearing Pressure | 4.6psi | 32kpa‖ — metric converted from the published imperial value |
| Breakout - Bucket | 6092.4lb | 2,763.5kg‖ — metric converted from the published imperial value |
| Dipper Tearout | 4271.4lb | 1,937.5kg‖ — metric converted from the published imperial value |
| Main Pumps - Maximum Flow | 20.3gal/min | 76.8l/min‖ — metric converted from the published imperial value |
05 Weights Specification
| Operating Weight | 7760.3lb | 3,520kg‖ — metric converted from the published imperial value |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.