Specification sheet Wheel Loader Ref john-deere-344l-wheel-loader

John Deere 344L

The John Deere 344L is a wheel loader with an operating weight of 19,532.96 lb (8,860 kg), and a 61 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
19,532.96lb
8,860kg
Engine power
61hp
45.5kW
Net Power

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the John Deere 344L sits at the heavy end of its class:

  • Operating weight 19,530 lb heavier than 89% (n=374)
  • Engine power 61 hp less powerful than 62% (n=367)

Not positioned on bucket capacity — withheld or unpublished for this machine.

01 Engine Specification

Pump Gear
Engine Output-Net 103hp 76.9kw
Transmission Type Hydrostatic
Engine Make John Deere
Engine Model PowerTech 4045T
Net Power 61hp 45.5kw
Torque 298.8lb ft 405Nm
Rated Speed 2000rpm
Displacement 274.7cu in 4.5L
System Voltage 12V
Emission Level Tier 4
Alternator 90amps

02 Capacities Specification

Hydraulic Tank 30.4gal 115L
Heaped Capacity 2yd3 1.5m3
Transmission 0.6gal 2L

03 Operational Specification

Operating Weight 19533lb 8860kg
Fuel Capacity 41gal 155L
Front Axle/Diff Fluid Capacity 2gal 7.5L
Rear Axle/Diff Fluid Capacity 2gal 7.5L
Tire Size 17.5 R25

04 Transmission Specification

Pump Flow 30.4gal/min 115L/min
System Pressure 3480psi 23993.8kPa

05 Brakes Specification

Parking Brake Wet Disc
Actuation Hydraulic
Brakes Type Wet Disc & Drum
Service Brake Driveline

06 Bucket Dimensions

Breakout - Bucket 7444 (16411) kgf (Ibf)
Bucket Capacity - Smallest 1.97yd3 1.5m3
Largest Bucket Capacity 2.62yd3 2m3

07 Dimensions Dimensions

Ground Clearance 16.93in 430mm
Width Over Tires 7.78ft in 2370mm
Wheelbase 8.54ft in 2600mm
Turning Circle 29.6ft in 9020mm
Overall Length (W/Bucket) 21ft in 6400mm
Height Over Cab 9.95ft in 3030mm
Height - Pivot Pin 12.21ft in 3720mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.