John Deere 344J
The John Deere 344J is a wheel loader with an operating weight of 18,408 lb (8,350 kg), a 98 hp engine, and a 2 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 344J sits above the median for its class:
- Operating weight 18,410 lb heavier than 80% (n=374)
- Engine power 98 hp more powerful than 78% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4045T | |
| Net Power | 98hp | 73kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 291lb ft | 395Nm |
| Displacement | 276cu in | 4.5L |
| Torque Measured @ | 1400rpm | |
| Torque Rise | 36% |
02 Operational Specification
| Operating Weight | 18408lb | 8350kg |
|---|---|---|
| Fuel Capacity | 42gal | 159L |
| Hydraulic System Fluid Capacity | 26gal | 98L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 7.1gal | 26.5L |
| Front Axle/Diff Fluid Capacity | 2.5gal | 9.3L |
| Rear Axle/Diff Fluid Capacity | 2.3gal | 8.7L |
| Static Tipping Weight | 13668lb | 6200kg |
| Turning Radius ‡ — value corrected — the source published it under the wrong unit | 13.8ft in | 4205mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 17.5R25 |
03 Transmission Specification
| Transmission Type | Hydraulic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 18.6mph | 29.9km/h |
| Max Speed - Reverse | 18.6mph | 29.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335psi | 22980kPa |
|---|---|---|
| Pump Flow Capacity | 30gal/min | 114L/min |
| Raise Time | 4.4sec | |
| Dump Time | 1.5sec | |
| Lower Time | 4sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.33ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Heaped | 2yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.6yd3 | 1.2m3 |
| Bucket Width | 7.88ft in | 2400mm |
| Breakout Force | 17310lb | 77kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 385mm |
|---|---|---|
| Length With Bucket On Ground | 20.08ft in | 6130mm |
| Width Over Tires ‡ — value corrected — the source published it under the wrong unit | 3.77ft in | 1150mm |
| Height To Top Of Cab | 9.92ft in | 3023mm |
| Wheelbase | 8.5ft in | 2600mm |
| Hinge Pin - Max Height | 12ft in | 3660mm |
| Reach At Max Lift And Dump | 2.72ft in | 830mm |
Data notes
Corrected value. The source published these figures under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.
- Turning Radius: shown as 13.8 ft in (source stated a value inconsistent with its own metric figure of 4205 mm)
- Width Over Tires: shown as 3.77 ft in (source stated a value inconsistent with its own metric figure of 1150 mm)
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.